DSpace Ana Sayfası
→
Yazara göre listeleme

Yazar "Dericioğlu, Arcan F." için listeleme

Toplam kayıt 9, listelenen: 1-9

A Comparative Study of Effects of Additive Particle Size and Content on Wetting Behavior and Brazing Performance of C/SiC Composite

Saltık, Simge; Esen, Ziya; Dericioğlu, Arcan F. (2023-07)

This study has focused on the influence of size and content of SiC particle incorporation on the wetting behavior of the Ticusil brazing filler alloy and on its brazing performance in C/SiC composite/Ti6Al4V alloy joints. ...
Comparison of the Short and Long-Term Degradation Behaviors of As-Cast Pure Mg, Az91 and We43 Alloys

Bütev Öcal, Ezgi; Esen, Ziya; Aydınol, Kadri; Dericioğlu, Arcan F. (Elsevier LTD., 2020-02-01)

The corrosion behaviors of pure magnesium, AZ91, and WE43 alloys have been evaluated by weight loss, hydrogen evolution rate, pH change measurements and potentiodynamic polarization as well as electrochemical impedance ...
Corrosion Behaviours of Ti6Al4V-Mg/Mg-Alloy Composites

Esen, Ziya; Öcal, Ezgi Bütev; Akkaya, Aslı; Gürçay, Bensu; Özcan, Ceren; Özgümüş, Burcu Aslı; Duygulu, Özgür; Dericioğlu, Arcan F. (Elsevier LTD., 2020-04-15)

The effect of coupling of unalloyed Mg and Mg-alloys (AZ91 and WE43) with Ti6Al4V alloy on corrosion and degradation behaviours of produced composites has been investigated in simulated body fluid (SBF) by hydrogen evolution, ...
Designing thermochemical processes for ti-alloys produced by additive manufacturing techniques

Esen, Ziya; Doğu, Merve Nur; Bilgin, Güney Mert; Tan, Evren; Berkay Gümüş, Berkay; Dericioğlu, Arcan F. (2019)

Ti-6Al-4V alloys are extensively used in biomedical, aerospace and petro-chemical applications mainly due to their high specific strength, excellent corrosion resistance and high fatigue strength. In contrast to conventional ...
Effect of CNT impregnation on the mechanical and thermal properties of C/C-SiC composites

Tülbez, Simge; Esen, Ziya; Dericioğlu, Arcan F. (2020-06)

The present study investigates the effect of additional carbon source, in the form of carbon nanotubes (CNTs), on mechanical and thermal properties of carbon fiber reinforced silicon carbide (C/C-SiC) ceramic matrix ...
Effect of sn alloying on the diffusion bonding behavior of al-mg-si alloys

Atabay, Sıla Ece; Esen, Ziya; Dericioğlu, Arcan F. (Springer, 2017-07)

Effect of Sn as an alloying element on the diffusion-bonding behavior of Al-Mg-Si alloy has been studied by means of differential scanning calorimetry (DSC), X-ray diffraction (XRD), scanning electron microscopy (SEM) and ...
Microstructural and texture evolution during thermo-hydrogen processing of Ti6Al4V alloys produced by electron beam melting

Doğu, Merve Nur; Esen, Ziya; Davut, Kemal; Tan, Evren; Gümüş, Berkay; Dericioğlu, Arcan F. (2020-10)

The present study was conducted to reveal the effects of building angles and post heat-treatments (2-step Thermo-Hydrogen Processing (THP) and conventional annealing treatment) on the density, microstructure and texture ...
Optimization of the mechanical properties of Ti-6Al-4V alloy fabricated by selective laser melting using thermohydrogen processes

Bilgin, Güney Mert; Esen, Ziya; Kuşhan Akın, Seniz Reyhan; Dericioğlu, Arcan F. (Elsevier Science SA, 2017-07-17)

2-step Thermo Hydrogen Process (THP) including hydrogenation and dehydrogenation steps was applied to Ti-6Al-4V alloy fabricated by selective laser melting (SLM) process to refine the microstructure and to increase the ...
Titanium-magnesium based composites: mechanical propertiesand in-vitro corrosion response in ringer's solution

Esen, Z; Dikici, Burak; Duygulu, Özgür; Dericioğlu, Arcan F. (Elsevier Science BV, 2013-06-20)

Ti-Mg composite rods exhibiting both bioinert and biodegradable characteristics have been manufactured by hot rotary swaging from elemental powders of titanium and magnesium. As a result of processing, spherical magnesium ...

Yazar "Dericioğlu, Arcan F." için listeleme

Yazar "Dericioğlu, Arcan F." için listeleme

DSpace'de Ara

Göz at

Tüm DSpace

Hesabım