DSpace@Çankaya

Effect of use of cu-cr p/m electrodes on machining performance of electric discharge machining

Basit öğe kaydını göster

dc.contributor.author Gülcan, Orhan
dc.contributor.author Uslan, İbrahim
dc.contributor.author Usta, Yusuf
dc.contributor.author Çoğun, Can
dc.date.accessioned 2017-06-07T08:50:19Z
dc.date.available 2017-06-07T08:50:19Z
dc.date.issued 2015
dc.identifier.citation Gülcan, O...et al. (2015). Effect of use of cu-cr p/m electrodes on machining performance of electric discharge machining. Journal of the Faculty of Engineering and Architecture of Gazi University, 30(3), 381-394. tr_TR
dc.identifier.issn 1300-1884
dc.identifier.uri http://hdl.handle.net/20.500.12416/1592
dc.description.abstract In this study, the effect of use of Cu-Cr powder metal (P/M) electrodes on EDM performance outputs, namely material removal rate (MRR), electrode wear rate (EWR), mean and maximum roughness of machined surface (R-a and R-z) and workpiece surface recast layer thickness, was investigated experimentally. The Cu-Cr P/M electrodes produced at different mixing ratios, compacting pressures and sintering temperatures were used to machine SAE 1040 steel. The analyses performed have shown that the electrode material is deposited on to the work surface as a layer and the powder mixing ratio, the compaction pressure and sintering temperature affect the EDM performance outputs tr_TR
dc.language.iso eng tr_TR
dc.publisher Gazi University, Fac Engineering Architecture tr_TR
dc.rights info:eu-repo/semantics/closedAccess
dc.subject EDM tr_TR
dc.subject P/M Electrode tr_TR
dc.subject Cu Powder tr_TR
dc.subject Cr Powder tr_TR
dc.subject Mixing Ratio tr_TR
dc.subject Compacting Pressure tr_TR
dc.subject Sintering Temperature tr_TR
dc.title Effect of use of cu-cr p/m electrodes on machining performance of electric discharge machining tr_TR
dc.type article tr_TR
dc.relation.journal Journal of the Faculty of Engineering and Architecture of Gazi University tr_TR
dc.contributor.authorID 3113 tr_TR
dc.contributor.authorID 118190 tr_TR
dc.contributor.authorID 3837 tr_TR
dc.identifier.volume 30 tr_TR
dc.identifier.issue 3 tr_TR
dc.identifier.startpage 381 tr_TR
dc.identifier.endpage 394 tr_TR
dc.contributor.department Çankaya Üniversitesi, Mühendislik Fakültesi, Mekatronik Mühendisliği Bölümü tr_TR


Bu öğenin dosyaları:

Dosyalar Boyut Biçim Göster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster