DSpace@Çankaya

Tür "bookPart" için Makine Mühendisliği Bölümü listeleme

Tür "bookPart" için Makine Mühendisliği Bölümü listeleme

Sırala: Sıra: Sonuçlar:

  • A Droplet Based Multi-Drug Screening System Controlled With Electrostatic Microvalves 
    Yıldırım, Ender; Özgür, E.; Kulah, Haluk (Chemical and Biological Microsystems Society, 2012)
    This paper presents a droplet-based drug effect analysis system utilizing electrostatically-actuated normallyclosed microvalves to screen the effect of multiple drugs on a single type of cell. Proposed system minimizes the ...
  • A fast and optimal static segment scheduling method for FlexRay v3.0 
    Çakmak, Cumhur; Schmidt, Ece Güran; Schmidt, Klaus Werner (IEEE, 2017)
    We propose a novel and fast frame scheduling method for the Static Segment (SS) of the new in-vehicle network standard FlexRay v3.0 in this paper. The proposed methods assigns frames to the SS using the minimum number of ...
  • A Study of the Structural and Mechanical Characterization of Hybrid Nanocomposite Material 
    Mahmoud, A. K.; Al-Nassar, S. I.; Demiral, Murat; Kadhim, H. M. (Trans Tech Publications LTD, 2017)
    This work is devoted on the synthesized new hybrid nanocomposite materials by using mechanical stirring method through a combination of different types of material; epoxy based matrix and nanofiller (TiO2 nanoparticles) ...
  • Clean Energy Generation in Residential Green Buildings- CH2 
    Özgirgin Yapıcı, Ekin (IET Publishing, 2019)
    Residential buildings consume about a quarter of all energy (including electrical and thermal) in industrialized countries and emit around 20% of the carbon emissions there. Older and outdated heating and cooling technology ...
  • Comparison of Different Turbulent Models in Turbulent-Forced Convective Flow and Heat Transfer Inside Rectangular Cross-Sectioned Duct Heating At the Bottom Wall 
    Arslan, Kamil; Onur, Nevzat (Progress in Exergy, Energy, and the Environment, 2014-01-01)
    In this study, steady-state turbulent-forced flow and heat transfer in a horizontal smooth rectangular cross-sectioned duct was numerically investigated. The study was carried out in the turbulent flow region where Reynolds ...
  • Design and Optimization of A Walking Over-Constrained Mechanism 
    Özgün, Selvi; Ceccarelli, Marco; Yavuz, Samet (Springer Netherlands, 2019)
    In this paper, a walking overconstrained mechanism with one DoF is presented. Firstly, its dimensional parameters and geometry are shown and a step profile which is wanted to be followed by end point of the walking mechanism ...
  • Electrochemical discharge machining: trends and development 
    Perveen, Asma; Akar, Samet (2021)
    The fabrication of microscale products revolutionizes the way manufacturing industries work today and has become the demand of current era due to their applications in various fields like microfluidics, biomedical testing ...
  • Finite element modeling of mechanical micromachining 
    Oliaei, Samad Nadimi Bavil; Demiral, Murat (2017-01-01)
    The knowledge about all these phenomena is necessary to fabricate microparts, satisfying required dimensional and geometrical tolerances and surface quality requirements. Therefore, developing predictive techniques to ...
  • Improved load distribution for controller area network 
    Batur, Ahmet; Schmidt, Klaus Werner; Schmidt, Ece Güran (IEEE, 2017)
    The main requirement for the design of the controller are network (CAN) is to guarantee that each message response time is smaller than their specified deadline. In practical in-vehicle applications, messages on CAN are ...
  • Inverse kinematics and dynamics of an overconstrained manipulator for upper extremity rehabilitation 
    Selvi, Özgün; Yılmaz, K. (Springer International Publishing, 2017)
    In this paper, an overconstrained manipulator is selected for the purpose of rehabilitation of the upper extremity. The geometry of the selected manipulator fits the exact motion of the upper extremity and acts as an ...
  • Microchannels for microfluidic systems 
    Nasseri, Behzad; Akar, Samer; Naseri, Erdinç (Academic Press, 2021)
    Microfluidic systems (which are also known as microchannel devices) are an important and versatile practical apparatus applicable in different areas of science and technology. The appropriate design of microfluidic system ...
  • Technological Advances and Challenges in Chemical Mechanical Polishing 
    Nadimi Bavil Oliaei, Samad; Mukhtarkhanov, Muslim; Perveen, Asma (2020)
    It has been already several decades since chemical mechanical polishing (CMP) process has been deployed as a planarization technique for the fabrication of integrated circuit (IC) in the semiconductor industries. CMP is ...