Yazar "52373" için Mühendislik Fakültesi listeleme

Toplam kayıt 25, listelenen: 1-20

Sonraki Sayfa

A Comparative Study of Effects of Additive Particle Size and Content on Wetting Behavior and Brazing Performance of C/SiC Composite

Saltık, Simge; Esen, Ziya; Dericioğlu, Arcan F. (2023-07)

This study has focused on the influence of size and content of SiC particle incorporation on the wetting behavior of the Ticusil brazing filler alloy and on its brazing performance in C/SiC composite/Ti6Al4V alloy joints. ...
Characterization of loose powder sintered porous titanium and TI6Al4V alloy

Esen, Ziya; Tarhan Bor, Elif; Bor, Şakir (2009-08)

Porous titanium and Ti6Al4V alloy, biomedical candidate materials for use in orthopedic and dental implants, were manufactured by sintering the powders at various temperatures in loose condition. The characteristics of the ...
Characterization of Ti-6Al-4V alloy foams synthesized by space holder technique

Esen, Ziya; Bor, Şakir (Elsevier Science S A, 2011-03-25)

Ti-6Al-4V foams, biomedical candidate materials, were synthesized by powder metallurgical space holder technique as a result of evaporation of magnesium to achieve desired porosity content. Final products contained porosities ...
Characterization of Ti6Al7Nb alloy foams surface treated in aqueous NaOH and CaCl2 solutions

Bütev, Ezgi; Esen, Ziya; Bor, Şakir (Elsevier Science BV, 2016-07)

Ti6Al7Nb alloy foams having 53-73% porosity were manufactured via evaporation of magnesium space holders. A bioactive 1 mu m thick sodium hydrogel titanate layer, NaxH2-xTiyO2y+1., formed after 5 M NaOH treatment, was ...
Comparison of the Short and Long-Term Degradation Behaviors of As-Cast Pure Mg, Az91 and We43 Alloys

Bütev Öcal, Ezgi; Esen, Ziya; Aydınol, Kadri; Dericioğlu, Arcan F. (Elsevier LTD., 2020-02-01)

The corrosion behaviors of pure magnesium, AZ91, and WE43 alloys have been evaluated by weight loss, hydrogen evolution rate, pH change measurements and potentiodynamic polarization as well as electrochemical impedance ...
Corrosion Behaviours of Ti6Al4V-Mg/Mg-Alloy Composites

Esen, Ziya; Öcal, Ezgi Bütev; Akkaya, Aslı; Gürçay, Bensu; Özcan, Ceren; Özgümüş, Burcu Aslı; Duygulu, Özgür; Dericioğlu, Arcan F. (Elsevier LTD., 2020-04-15)

The effect of coupling of unalloyed Mg and Mg-alloys (AZ91 and WE43) with Ti6Al4V alloy on corrosion and degradation behaviours of produced composites has been investigated in simulated body fluid (SBF) by hydrogen evolution, ...
Corrosion of Metallic Biomaterials

Dikici, Burak; Esen, Ziya; Duygulu, Özgür; Güngör, Serap (Springer Verlag, 2015)

Metallic materials have been used as biomedical implants for various parts of the human body for many decades. The physiological environment (body fluid) is considered to be extremely corrosive to metallic surfaces; and ...
Designing thermochemical processes for ti-alloys produced by additive manufacturing techniques

Esen, Ziya; Doğu, Merve Nur; Bilgin, Güney Mert; Tan, Evren; Berkay Gümüş, Berkay; Dericioğlu, Arcan F. (2019)

Ti-6Al-4V alloys are extensively used in biomedical, aerospace and petro-chemical applications mainly due to their high specific strength, excellent corrosion resistance and high fatigue strength. In contrast to conventional ...
Effect of alkali treatment parameters on surface structure and mechanical properties of porous Ti6A17NB scaffolds

Bütev Öcal, Ezgi; Yeni, Elif Eda; Yılmaz, Emre; Esen, Ziya; Bor, Şakir (2014)

In the present study, highly porous Ti6Al7Nb alloy scaffolds having 70% pore contents with 200-250 µm average pore size were produced through the spacer holder technique as a result of evaporation of Mg powder from the ...
Effect of CNT impregnation on the mechanical and thermal properties of C/C-SiC composites

Tülbez, Simge; Esen, Ziya; Dericioğlu, Arcan F. (2020-06)

The present study investigates the effect of additional carbon source, in the form of carbon nanotubes (CNTs), on mechanical and thermal properties of carbon fiber reinforced silicon carbide (C/C-SiC) ceramic matrix ...
Effect of electrical discharge machining on dental Y-TZP ceramic-resin bonding

Rona, Nergiz; Yenisey, Murat; Küçüktürk, Gökhan; Gürün, Hakan; Çoğun, Can; Esen, Ziya (Elsevier Ireland LTD, 2017-04)

Purpose: The study determined (i) the effects of electrical discharge machining (EDM) on the shear-bond strength (SBS) of the bond between luting resin and zirconia ceramic and (ii) zirconia ceramic's flexural strength ...
Effect of post fabrication aging treatment on the microstructure, crystallographic texture and elevated temperature mechanical properties of IN718 alloy fabricated by selective laser melting

Ozer, Seren; Bilgin, Güney Mert; Davut, Kemal; Esen, Ziya; Dericioglu, Arcan F. (2022-08)

The effect of building direction and post fabrication aging treatment on the microstructure, crystallographic texture and high temperature mechanical properties of Inconel 718 (IN718) alloy fabricated by selective laser ...
Effect of powder metallurgy Cu-B4C electrodes on workpiece surface characteristics and machining performance of electric discharge machining

Çoğun, Can; Esen, Ziya; Çoğun, Ferah (Sage Publications LTD, 2016-12)

The main aim of this study is to produce new powder metallurgy (PM) Cu-B4C composite electrode (PM/(Cu-B4C)) capable of alloying the recast workpiece surface layer during electric discharge machining process with boron and ...
Effect of sn alloying on the diffusion bonding behavior of al-mg-si alloys

Atabay, Sıla Ece; Esen, Ziya; Dericioğlu, Arcan F. (Springer, 2017-07)

Effect of Sn as an alloying element on the diffusion-bonding behavior of Al-Mg-Si alloy has been studied by means of differential scanning calorimetry (DSC), X-ray diffraction (XRD), scanning electron microscopy (SEM) and ...
Effects of electrolytic copper and copper alloy electrodes on machining performance in electrical discharge machining (EDM)

Şimşek, Ülke; Çoğun, Can; Esen, Ziya (2022-03-18)

The most important cost element of electric discharge machining (EDM) is the production of tool electrode (shortly electrode). In the EDM process, copper and its alloys are often used as electrode materials. The machining ...
Experimental Investigation on Wire Electric Discharge Machining of Biodegradable AZ91 Mg Alloy

Ürtekin, Levent; Özerkan, Hacı Bekir; Çoğun, Can; Genç, Asım; Esen, Ziya; Bozkurt, Fatih (2021-10)

The AZ91 magnesium alloy, used commonly as a biodegradable material in biomedical applications, is generally formed by conventional casting method (CCM) and high-pressure die casting method (HPDCM). The AZ91 alloys exhibit ...
Fabrication, Morphology Analysis, and Mechanical Properties of Ti Foams Manufactured Using the Space Holder Method for Bone Substitute Materials

Çetinel, Oktay; Esen, Ziya; Yıldırım, Bora (MDPI, 2019-03-17)

Porous titanium (Ti) offers several key attributes as a biomedical material. Among the known characteristics of Ti relevant to biomedical applications, the mechanical performance and effects of a pore structure on the ...
Microstructural and texture evolution during thermo-hydrogen processing of Ti6Al4V alloys produced by electron beam melting

Doğu, Merve Nur; Esen, Ziya; Davut, Kemal; Tan, Evren; Gümüş, Berkay; Dericioğlu, Arcan F. (2020-10)

The present study was conducted to reveal the effects of building angles and post heat-treatments (2-step Thermo-Hydrogen Processing (THP) and conventional annealing treatment) on the density, microstructure and texture ...
Microstructural Refinement of Ti-6Al-4V Alloy Fabricated by Additive Manufacturing Using Thermochemical Processes

Bilgin, Güney Mert; Esen, Ziya; Kuşhan Akın, Şeniz Reyhan; Dericioğlu, Arcan Fehmi (2016)
Optimization of the mechanical properties of Ti-6Al-4V alloy fabricated by selective laser melting using thermohydrogen processes

Bilgin, Güney Mert; Esen, Ziya; Kuşhan Akın, Seniz Reyhan; Dericioğlu, Arcan F. (Elsevier Science SA, 2017-07-17)

2-step Thermo Hydrogen Process (THP) including hydrogenation and dehydrogenation steps was applied to Ti-6Al-4V alloy fabricated by selective laser melting (SLM) process to refine the microstructure and to increase the ...

Toplam kayıt 25, listelenen: 1-20

Sonraki Sayfa

DSpace'de Ara

Göz at

Tüm DSpace
Bu Bölüm

Yazar "52373" için Mühendislik Fakültesi listeleme

Yazar "52373" için Mühendislik Fakültesi listeleme

DSpace'de Ara

Göz at

Tüm DSpace

Bu Bölüm

Hesabım