DSpace@Çankaya

Characterization of loose powder sintered porous titanium and TI6Al4V alloy

Basit öğe kaydını göster

dc.contributor.author Esen, Ziya
dc.contributor.author Tarhan Bor, Elif
dc.contributor.author Bor, Şakir
dc.date.accessioned 2023-02-15T11:13:01Z
dc.date.available 2023-02-15T11:13:01Z
dc.date.issued 2009-08
dc.identifier.citation Esen, Ziya; Tarhan Bor, Elif; Bor, Şakir (2009). "Characterization of loose powder sintered porous titanium and TI6Al4V alloy", Turkish Journal of Engineering and Environmental Sciences, Vol. 33, No. 3, pp. 207-219. tr_TR
dc.identifier.issn 1303-6157
dc.identifier.uri http://hdl.handle.net/20.500.12416/6238
dc.description.abstract Porous titanium and Ti6Al4V alloy, biomedical candidate materials for use in orthopedic and dental implants, were manufactured by sintering the powders at various temperatures in loose condition. The characteristics of the corresponding powders and utilized sintering temperatures limited the final porosities in the range 30-37.5 vol. %. Similar to wrought alloys, compression stress-strain curves of porous samples exhibited 3 distinct deformation regions containing an elastic region, subsequent to yielding strain hardening region up to a peak stress and fast fracture after small straining. The mechanical properties of porous samples of both types were observed to obey minimum solid area (MSA) models in which the bond regions between particles perpendicular to loading direction are assumed to dominate in transmission of stress. A linear relation was obtained between yield strength and square of neck size ratio, (X/D)2, where X and D represent the average neck and particle diameters, respectively. tr_TR
dc.language.iso eng tr_TR
dc.relation.isversionof 10.3906/muh-0906-41 tr_TR
dc.rights info:eu-repo/semantics/closedAccess tr_TR
dc.subject Mechanical Property tr_TR
dc.subject Porosity tr_TR
dc.subject Sintering tr_TR
dc.subject Ti6Al4V Alloy tr_TR
dc.subject Titanium tr_TR
dc.title Characterization of loose powder sintered porous titanium and TI6Al4V alloy tr_TR
dc.type article tr_TR
dc.relation.journal Turkish Journal of Engineering and Environmental Sciences tr_TR
dc.contributor.authorID 52373 tr_TR
dc.identifier.volume 33 tr_TR
dc.identifier.issue 3 tr_TR
dc.identifier.startpage 207 tr_TR
dc.identifier.endpage 219 tr_TR
dc.contributor.department Çankaya Üniversitesi, Mühendislik Fakültesi, Endüstri Mühendisliği Bölümü tr_TR


Bu öğenin dosyaları:

Dosyalar Boyut Biçim Göster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster