DSpace Repository

Numerical simulation and experimental investigation: Metal spinning process of stepped thin-walled cylindrical workpiece

Show simple item record

dc.contributor.author Seyedzavvar, Mirsadegh
dc.contributor.author Seyedzavvar, Mirali
dc.contributor.author Akar, Samet
dc.contributor.author Abbasi, Hossein
dc.date.accessioned 2024-04-29T12:19:42Z
dc.date.available 2024-04-29T12:19:42Z
dc.date.issued 2022-01-30
dc.identifier.citation Seyedzavvar, Mirsadegh;...et.al. (2022). "Numerical simulation and experimental investigation: Metal spinning process of stepped thin-walled cylindrical workpiece", Turkish Journal of Engineering, Vol.6, No.1, pp.67-80. tr_TR
dc.identifier.issn 25871366
dc.identifier.uri http://hdl.handle.net/20.500.12416/8043
dc.description.abstract Many equipment and devices utilized in the aerospace industry are formed as symmetric parts through high plastic deformation of high strength sheet metal alloys with low thickness. Considering the inherent advantages of the spinning process of simple tooling and concentrated deformation loading, this process can be considered as one of the main options in producing these thin-sectioned lightweight parts. In this study, a Finite Element (FE) model has been developed to simulate the formation of a stepped thin-walled cylindrical workpiece of AISI 316 stainless steel alloy by spinning process. The FE simulation results were employed to investigate the effects of process parameters, including feed rate of the roller and rotational velocity of the mandrel on the distribution of stress and strain in the sheet metal, wrinkling failure, and thinning of the sheet metal during deformation. Experiments were carried out using selective input parameters based on the results of FE simulations. The comparison between FE simulations and experiments revealed that the developed model could predict the thinning of the sheet metals with over 93 % accuracy. Additionally, a good agreement between the experimentally deformed sheet configurations with those resulting from finite element simulations has been observed. tr_TR
dc.language.iso eng tr_TR
dc.relation.isversionof 10.31127/tuje.824890 tr_TR
dc.rights info:eu-repo/semantics/openAccess tr_TR
dc.subject Feed Rate tr_TR
dc.subject Mandrel Rotational Speed tr_TR
dc.subject Sheet Metal tr_TR
dc.subject Spinning Process tr_TR
dc.subject Stress And Strain tr_TR
dc.subject Wrinkling tr_TR
dc.title Numerical simulation and experimental investigation: Metal spinning process of stepped thin-walled cylindrical workpiece tr_TR
dc.type article tr_TR
dc.relation.journal Turkish Journal of Engineering tr_TR
dc.contributor.authorID 315516 tr_TR
dc.identifier.volume 6 tr_TR
dc.identifier.issue 1 tr_TR
dc.identifier.startpage 67 tr_TR
dc.identifier.endpage 80 tr_TR
dc.contributor.department Çankaya Üniversitesi, Mühendislik Fakültesi, Makine Mühendisliği Bölümü tr_TR


Files in this item

This item appears in the following Collection(s)

Show simple item record