DSpace@Çankaya

Investigation of the Erosive Wear Resistance of Boronized Ash-Blowing Nozzles

Basit öğe kaydını göster

dc.contributor.author Çalık, A.
dc.contributor.author Özbakır, O.
dc.contributor.author Karakaş, S.
dc.contributor.author Uçar, N.
dc.date.accessioned 2019-12-16T13:28:56Z
dc.date.available 2019-12-16T13:28:56Z
dc.date.issued 2017-02
dc.identifier.citation Calik, A.; Ozbakir, O.; Karakas, S.; Ucar, N. (2017). Investigation of the Erosive Wear Resistance of Boronized Ash-Blowing Nozzles, Acta Physica Polonica A, 131(2), 252-254 tr_TR
dc.identifier.issn 0587-4246
dc.identifier.uri http://hdl.handle.net/20.500.12416/2166
dc.description.abstract In this study, pack boronizing was applied to ash-blowing nozzles manufactured from AISI 1040 steels using Ekabor II powders as the boronizing source at a temperature of 1273 K for a duration of 8 h. Erosive wear tests of boride ash-blowing nozzles were carried out in ash delivery line of thermal reactor under actual working conditions. It was observed that erosive wear resistance of borided ash-blowing nozzles were increased 3 times as a result of the boronizing process. The improved wear resistance of the borided samples can be explained by increased surface hardness and higher work hardening. tr_TR
dc.language.iso eng tr_TR
dc.publisher Polish Acad Sciences Inst Physics tr_TR
dc.relation.isversionof 10.12693/APhysPolA.131.252 tr_TR
dc.rights info:eu-repo/semantics/openAccess tr_TR
dc.subject Steels tr_TR
dc.title Investigation of the Erosive Wear Resistance of Boronized Ash-Blowing Nozzles tr_TR
dc.type article tr_TR
dc.relation.journal Acta Physica Polonica A tr_TR
dc.contributor.authorID 48915 tr_TR
dc.identifier.volume 131 tr_TR
dc.identifier.issue 2 tr_TR
dc.identifier.startpage 252 tr_TR
dc.identifier.endpage 254 tr_TR
dc.contributor.department Çankaya Üniversitesi, Mühendislik Fakültesi, Malzeme Bilimi ve Mühendisliği Bölümü tr_TR


Bu öğenin dosyaları:

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster