DSpace@Çankaya

Effect of sn alloying on the diffusion bonding behavior of al-mg-si alloys

Basit öğe kaydını göster

dc.contributor.author Atabay, Sıla Ece
dc.contributor.author Esen, Ziya
dc.contributor.author Dericioğlu, Arcan F.
dc.date.accessioned 2020-03-06T12:29:20Z
dc.date.available 2020-03-06T12:29:20Z
dc.date.issued 2017-07
dc.identifier.citation Atabay, Sila Ece; Esen, Ziya; Dericioğlu, Arcan F., "Effect of sn alloying on the diffusion bonding behavior of al-mg-si alloys", Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, Vol.48A, No.7, pp.3181-3187, (2017). tr_TR
dc.identifier.issn 1073-5623
dc.identifier.uri http://hdl.handle.net/20.500.12416/2620
dc.description.abstract Effect of Sn as an alloying element on the diffusion-bonding behavior of Al-Mg-Si alloy has been studied by means of differential scanning calorimetry (DSC), X-ray diffraction (XRD), scanning electron microscopy (SEM) and mechanical testing of the diffusion-bonded joint. XRD results revealed the formation of Mg2Sn and (Sn) phases during solidification following induction casting. DSC results showed local liquid (Sn) formation during the bonding process for Sn-containing alloys, where its amount was found to be increasing with the increasing Sn content. Results revealed that Sn addition leads to an increase in the bond shear strength of the diffusion-bonded joints and elimination of the irregularities formed on the bonded interface. Fractured surfaces showed that formation of (Sn) layer at the bonded interface causes the fracture to transform from the ductile to the mixed fracture mode. tr_TR
dc.language.iso eng tr_TR
dc.publisher Springer tr_TR
dc.relation.isversionof 10.1007/s11661-017-4089-7 tr_TR
dc.rights info:eu-repo/semantics/closedAccess tr_TR
dc.subject Surface-Roughness tr_TR
dc.subject Aliminium-Alloy tr_TR
dc.subject Strenght tr_TR
dc.subject Joints tr_TR
dc.title Effect of sn alloying on the diffusion bonding behavior of al-mg-si alloys tr_TR
dc.type article tr_TR
dc.relation.journal Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science tr_TR
dc.contributor.authorID 52373 tr_TR
dc.identifier.volume 48A tr_TR
dc.identifier.issue 7 tr_TR
dc.identifier.startpage 3181 tr_TR
dc.identifier.endpage 3187 tr_TR
dc.contributor.department Çankaya Üniversitesi, Mühendislik Fakültesi, Malzeme Bilimi ve Mühendisliği Bölümü tr_TR


Bu öğenin dosyaları:

Dosyalar Boyut Biçim Göster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster