DSpace Repository

Investigation Of Working Temperature Effect On Micro-Cogeneration Application Of Proton Exchange Membrane Fuel Cells

Show simple item record

dc.contributor.author Budak, Yağmur
dc.contributor.author Özgirgin Yapıcı, Ekin
dc.contributor.author Devrim, Yılser
dc.date.accessioned 2024-03-25T13:03:13Z
dc.date.available 2024-03-25T13:03:13Z
dc.date.issued 2018
dc.identifier.citation Budak, Y.; Özgirgin Yapıcı, E.; Devrim, Y. (2018). "Investigation Of Working Temperature Effect On Micro-Cogeneration Application Of Proton Exchange Membrane Fuel Cells", Hittite Journal of Science and Engineering, Vol.5, pp.25-32. tr_TR
dc.identifier.issn 2148-4171
dc.identifier.uri http://hdl.handle.net/20.500.12416/7719
dc.description.abstract I n this study, micro-cogeneration application is used to increase the efficiency of Proton Exchange Membrane Fuel Cell (PEMFC) systems and effect of different operation temperatures on system performance is observed. For this reason, two different PEMFC systems were comparatively studied operating at 70o C and 160o C, respectively. Micro-cogeneration system design has done considering experimentally determined current density, power and temperature values. Since the amount of heat extracted from each PEMFC system is different related to the operating temperatures, different heat transfer fluids have been used for the cooling systems. These systems are designed for utilization of electricity and hot water for Atılım University Hydrogen Energy Laboratory. Heat loss calculation is made for the laboratory and thermal energy needed for heating the laboratory is calculated. Parallel to the design calculations, simple payback times for PEMFCs with micro-cogeneration applications were determined. LT-PEMFC and HT-PEMFC systems have 402 W and 456 W thermal powers respectively and 87.4 % and 92.8 % total cogeneration efficiencies were calculated for each system respectively. For each system maximum water temperatures and flow rates are calculated as a result of micro-cogeneration application. HT-PEMFC system has found to be capable of higher amount of heating. Even LT-PEMFC system has a lower thermal power and efficiency; it is determined to be more economical and has a lower pay pack time then HT-PEMFC system. For both systems, necessary number of stacks to be used for laboratory heating is calculated as four. tr_TR
dc.language.iso eng tr_TR
dc.relation.isversionof 10.17350/HJSE19030000116 tr_TR
dc.rights info:eu-repo/semantics/openAccess tr_TR
dc.subject Micro-Cogeneration tr_TR
dc.subject Hydrogen Energy tr_TR
dc.subject Proton Exchange Membrane Fuel Cell tr_TR
dc.title Investigation Of Working Temperature Effect On Micro-Cogeneration Application Of Proton Exchange Membrane Fuel Cells tr_TR
dc.type article tr_TR
dc.relation.journal Hittite Journal of Science and Engineering tr_TR
dc.contributor.authorID 31329 tr_TR
dc.identifier.volume 5 tr_TR
dc.identifier.startpage 25 tr_TR
dc.identifier.endpage 32 tr_TR
dc.contributor.department Çankaya Üniversitesi, Mühendislik Fakültesi, Makine Mühendisliği Bölümü tr_TR


Files in this item

This item appears in the following Collection(s)

Show simple item record